It is peace of carbon steel metal Material which can be used to connect to metal parts or supports for any types of equipment, & it has two names Threaded Rod & studs, we have diversified in name by length up to 12 Inches we call as studs & more than 12inches (30.48 cm) we called it as threaded rods.

It has as threading on the surface it will be a full length or Part by part it depends on customer requirements. The threaded configuration will be tight when rotated clockwise direction & Rotate anti-clockwise dismantling, Combine Linear and rotational development to make solid protection from pressure.

It is used for general purposes like connecting two parts, the system supports, cable management, Pipe Management, general fixing, hanging any equipment.

Generally, Contractors will use it in construction & installation of services, like Electrical, HVAC, Plumbing, Firefighting, Etc.

Selection of Threaded Rod or Studs.

There are many types of threaded rods available in the market that will suit various purposes, conditions, and materials, The completely threaded Rod supplies are Normally used when viable hold capacity is required through the whole length of the threaded rod.

They are frequently used to adjust structures or are installed into materials, similar to concrete, as the stringing gives great obstruction, The material is another basic factor to consider while picking the most appropriate bar for your application.

Threaded rod is used in various sectors & segments, and for a few purposes, for example as listed below.

1. construction sectors, 
2. Manufacturing sectors 
3. Agriculture sectors
4. Oil Extraction Sectors Etc.

The above sectors give fixing arrangements and serious costs for a variety of clients. We gracefully a few Threaded rod finishing will be 

1. Bright Zink plated
2. Hot Dip Galvanised 
3. Stainless steel 

 Technical Specification:-

How to find out the strength of the threaded rod?

We can find out the strength of the threaded rod with the help of formula, alow the tensile force for non undercut threaded rod is defined by AISC

P = 0.33 fu d24

Where:- fu  will be Unlimited tensile strength  

D2will be Diameter of threaded rod

Joining of Threaded Rod

To connect the both threaded Rod we need to used long Nut or coupling nut as shown in the figure. to get the necessary length and secure them together with strength.

Features of Threaded rod

Threaded rod feature can be listed as below. 

1. High Quality
2. High tensile strength
3. Durability
4. Superior performance
5. Rustproof nature
6. Good anti-corrosion ability 
7. Easy To install 

Application of Threaded rod

Threaded Rods can be consumed in large requirements in the construction of the building for supporting their services or any other equipment, Services are listed below in details 

1. Electricals
2. HVAC ( Heat Ventilation Air Conduction )
3. Plumbing.
4. Fire fighting.
5. Rainwater harvesting
6. Escalators & Lifts

We would like to thank you for the precious time which you have to spend on our blogs if you have any requirement of Electrical & hardware requirements come across kindly provide us an opportunity to work with you.

Can send your inquiry on [email protected] | [email protected]